KwikSense RD

KwikSense RD (Remote Display) Transmitter

Enquire Now

The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location. This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required. It can act as a controller and/or as a bridge between the detector and controller.

It comes with an industry-standard RS-485 MODBUS-RTU and 4-20 mA output to connect the controller as well as the detector. All settings can be configured using the supplied non-intrusive magnetic wand.

The KwikSense RD has numerous international certifications including ATEX, IECEx, SIL2, and INMETRO.

Applications

  • Oil, Gas and Petroleum Industry
  • Petrochemical Industry
  • Chemical Industry
  • Pharmaceutical Industry
  • Marine Industry
  • Fertilizer Industry
  • Nuclear Industry
  • Iron and Steel Industry

Features

  • Used for remote detection
  • Analog Industry standard 4-20 mA with Digital communication on MODBUS over RS 485
  • Temperature Class T4: -20o to +85o Celsius
  • 3 potential free relay contacts
  • Configuration via non-intrusive magnetic wand
  • Certification – ATEX, IECEX, SIL2, InMetro etc

Specifications

  • Sensor technology: NA (industrial standard 4-20mA input)
  • Operating Voltage: 18V to 30 VDC
  • System Type: µController based instrument (non intrusive calibration)
  • Display: 8 x 2 OLED Display
  • Sampling type: NA
  • Sensor: NA (industrial standard 4-20mA input)
  • LED’s: Tri-Colour LED
  • Alarms: Two user settable alarms
  • Output: RS-485 MODBUS/ 4-20mA Current
  • Relays: 3-potential free contacts
  • Load resistance: 600 Ω (max)
  • Power Consumption: < 3 W
  • Enclosure: Flameproof – Cast Aluminium alloy/ SS-316
  • Ingress protection: IP66
  • Dimensions: Approx Diameter: 250 mm; Height: 170 mm
  • Wire configuration: 3/4 wires
  • Interface: Calibration & configuration via Non-intrusive magnetic wand
    Wireless interface for configuration & monitoring (optional)
  • Operating Temperature: -20 to 60 ° C
  • Operating Pressure: Ambient + 10 %
  • Operating Humidity: 0-95 %RH (non-condensing)
  • Cable entries: ½” NPT (2 entries), 3/4″ (1 entry)
  • Certifications:
    1. ATEX/IECEx + PESO
    2. CMFRI
    3. SIL
    4. MED
    5. InMetro
  • Weight:
      Cast Aluminium Alloy: 2.5 kg (Approx.)
      SS 316: 5.2 kg (Approx.)

Interested In this
product?